My Ford Focus heater fan will only work on switch setting number 4 and then the A/C doesn't work on that setting. Could it be the resistor pack, and if so where is it located?
Thanks in advance!
The B man . . .
|
Could it be the resistor pack and if so where is it located?
Yep, but no idea where. First place I'd look though is by the blower motor.
|
the speed resistor is behind the glovebox,down to the right(4-pin connector) and is secured to the heater box by a single torx screw.They are usually repairable but a new one is only around £10.If you find the multi pin connector burnt/overheated ,Ford do a repair section which is also cheap.hth
|
Thanks elekie&a/c doctor . . . I'll have a dekko today to see what's what. Appreciate the help.
The B man.
snipquote
|
|
Replaced the resistor pack and it's OK now, just a bit noisy - it squeaks on the low speed - I guess that's the bearings . . .
|
|
|
|
|
I have had exactly the same problem - many thanks for the information! I will go out and play ! Steven-John
|
|
|
|
